Electronic Control Unit

2 Channel and 4 Channel Electronic Control Unit

The 刘玥首次大战黑人2-channel Electronic Control Unit (ECU) is comprised of 2 刘玥首次大战黑人hybrid stepper motor controllers, an EMI filter, and 6 analog pass-throughs for telemetry. The ECU enclosure has been designed to allow 2 ECU鈥檚 to be stacked to form a 4-channel ECU. The 2-channel ECU contains all power conditioning, pulse sequencing and output driver stages necessary to drive two 3-phase motors. The system electrical interface consists of power and command input lines, output motor drive lines and telemetry outputs. The required input commands are discrete for ENABLE and DIRECTION, and a pulse train on the STEP input. An initial discrete logic state on the ENABLE line will activate the control unit for the desired motor. On the DIRECTION line, one logic state enables clockwise rotation, and the other state enables counterclockwise rotation. Motion is initiated by the application of a pulse train on the STEP command line.

CONTACT OUR EXPERTS >

Jump To:

Features

Literature

Based on 刘玥首次大战黑人hybrid stepper motor controllers
The ECU contains all power conditioning, pulse sequencing and output driver stages necessary to drive two 3-phase motors.
Input commands are discrete for ENABLE and DIRECTION, and a pulse train on the STEP input.
Small volume
Low weight
Provides Rad Hard operation

Specifications

Characteristic	Units	Basis	Data
Weight	Pounds	聽聽聽聽 Standard聽聽聽聽聽	聽聽聽聽鈮� 2.2 聽聽聽聽
Weight	Pounds	聽聽聽聽 Standard聽聽聽聽聽	鈮� .99
Slap Rate	Hertz	Standard	0-1000
Logic Power	Watts	Standard	鈮� 0.7W@22V 1.5W@30V 3.6W@36V
Turn-On Surge	Amps	Standard	< 3A for 300 渭s
Power Insulation	Mohms	Minimum	> 5 Megohm isolation between power return and ground
Operational Temperature	deg C	Standard	-35藲 to +60藲
Survival Temperature	deg C	Standard	-45藲 to +75藲
Operational Voltage	Volts	Standard	22 to 36V