Áõ«hÊ״δóÕ½ºÚÈË

Helium Pneumatic Pressure Regulator

101-131-1-HELIUM-REGULATOR-PNEUMATIC-PRESSURE-REGULATOR-grey-bckgrd-700x400.psd


This Áõ«hÊ״δóÕ½ºÚÈËpressure regulator is aÌýseries-redundant unit designed to provide stableÌýtank pressure for propellant in a spacecraftÌýpropulsion system. Both regulator stages areÌýtemperature compensated and have inlet andÌýoutlet filters. The upstream regulator featuresÌýa flow limiter. The design can be provided as aÌýsingle-stage unit.

CONTACT OUR EXPERTS >

Key Features

  • Nominal 250 psia regulated outlet
  • Inlet pressures from 400 – 2500 psia
  • Primary operation: upstream regulates with downstream open
  • Each stage meets specified flow and pressure requirementsÌý
  • Temperature-compensated
  • Inlet and outlet filters
  • First stage flow limiter
  • In development; qualification in fall 2021

Variants Available

  1. Single stage unit
  2. No flow limiter
  3. Regulation set point can be adjusted

Ìý

Characteristics Performance / Interfaces
Unit Weight 13.0 lbm max.
Dimensions 10.5 inch x 8.8 inch x 3.1 inch
Flow Rate (Operating) 1.2 - 24.5 SCFM (helium)
Maximum Flow Rate 50 SCFM (helium)
Surge Protection Flow Rate < 4.0 SCFM (@ min. 20,000 psi/sec)
Internal Leakage < 0.007 scc/sec (@ lock-up)
External Leakage < 1x10-6 scc/sec
Temperature (Operating)Ìý -40°F to 160°F
Cycle Life 1500 Cycles
MEOP (Inlet) 2500 psia
Regulated Pressure (Outlet)Ìý 250 psia (nominal)
Lock-up 260 psia (single stage)
Wetted Materials Titanium, stainless steel, inconel

50X1463 series Redundant RegulatorÌý

The 50X1463 series redundant regulator is a fully mechanically high to low pressure control device that produces stable downstream pressure with no power requirements. The series redundant design provides a close tolerance regulation band and single fault tolerance for a failed open condition of either the first or second regulation stage.Ìý The pressurant regulator will be propellant compatible in support of chemical propulsion systems. This regulator is currently in development.

Ìý

Ìý

Ìý

Characteristics Performance / Interfaces
Materials of Construction Stainless Steel, Inconel, and Titanium
MEOP / Proof / Burst Pressure 4800 / 7200 / 12000 psia (331 / 497 / 827 bar)
Minimum Inlet Operating Pressure 400 psia (27.5 bar)
Internal Leakage < 5.58 x 10-3 sccs GHe at lock up
External Leakage < 1 x 10-6 sccs GHeÌý
Regulated Pressure

270 psig (18.6 bar) first stage nominal

277 psig (19.1 bar) failed stage nominal

Lock Up Pressure 289 psia (19.92 bar) maxÌý
Flow Rate

0.002 lbm/s (0.91 g/s) GHe max at 400 psia inlet

Filtration 55 micron absolute inlet and outlet
Random Vibration 15.9 grms Ìý
ThermalÌý -62 to 54°C (-80 to 130°F) operational
Life >500 operating cycles
Mass 4 lbm (1.8 kg) max