High Security Vehicle Barriers Take On New Threats With Help From 刘玥首次大战黑人Electric Actuation

Speed, reliability and safety requirements are the highest priority
The technology is moving from hydraulic to electric听
A demanding environment requires reliable hardware and electronics
A complete turnkey solution must be easy to implement for technicians who are knowledgeable in hydraulic technology but limited in electric servo experience

Security Barrier Application听

Security is a topic frequently in the news today as countries seek to protect institutions from embassies to military installations to power facilities from potential attack. High security vehicle barriers are a last line of defense for these institutions and the technology being used for actuation is a critical factor. These barriers must be designed to stop a 7.5 tonne (15,000 lb) vehicle traveling at 80 kph (50 mph) with no penetration and need to be deployed in 1-1.5 seconds.

Until recently the technology being deployed was exclusively 鈥渙pen-loop鈥� hydraulic actuation but 刘玥首次大战黑人has been instrumental in helping the industry adopt a new solution with many benefits. As 刘玥首次大战黑人has significant expertise in both hydraulic and servo technology we were able to evaluate all options. Some factors encouraging barrier Original Equipment Manufacturers (OEMs) to adopt electric technology included the need to accommodate demanding environmental considerations (e.g. extreme temperatures, sand, dust, rain, ice, flooding, etc), meet power requirements, ensure maximum reliability and lower maintenance costs. Ultimately 刘玥首次大战黑人has helped the industry to successfully transition from open loop hydraulic to closed-loop electric realizing many desirable performance and operational benefits. This article describes this demanding application, the reasons 刘玥首次大战黑人recommended electric actuation to meet the customers goals and how companies have successfully implemented this technology to achieve impressive results.听

Background

Because of terrorist threats and tactics, security barriers have become essential for an effective security program. These were initially a concept of the US Department of State (US DoS) after the Beirut truck bombing of a US military barracks in 1983 but barriers are now used worldwide. There are 3 typical types of high security barriers available today. 听We have all seen these in our everyday activities but may not know the technology involved. The type selected depends on the needs of the situation.

The wedge/plate barrier type uses large plates which can weigh over several thousand kilograms (several thousand pounds), requiring significant power to be raised during an Emergency Fast Operate (EFO) situation. 听The weight and speed requirements present many challenges to designing a motion control system.听

Types of Security Barriers

Source: Courtesy of American PSG

Wedge/Plate barrier

Large steel plates which pop up out of the ground very quickly are typically deployed as final denial.听

Drop Arm/Crash Beam barrier

These barriers may look fairly benign, but many have a large chain or cable inside the tubing that acts like a cheese cutter. Typically used for traffic control.

Bollards

This type of barrier is more aesthetically appealing than the large plates and also allow pedestrian traffic.

To help you understand the application better it is important to explore what is required to stop a vehicle at various weights and speeds. Threat levels can be defined based on vehicle speed and weight. The vehicle bed penetration further defines the barriers stopping capability.

A vehicle moving toward a barrier has a certain kinetic energy which is the measure of how much 鈥渉itting power鈥� it possesses. This is measured by its weight and speed. The kinetic energy changes as the square of its velocity. On impact, some of the energy is converted to heat, sound and deformation of the vehicle, the barrier must absorb the remainder. This information has been converted into standards by the Department of State, ASTM and other governmental organization shown in the table below.听

Requirements from the DoS and ASTM standards

Wedge/Plate Barrier Construction听Source: APSG

听

Penetration Measuring Location (P-Rating)

听

The Customer Request

Traditionally hydraulic was the technology for plate barriers as it provided adequate power to lift the heavy plates at a speed required for fast deployment. These hydraulically actuated barrier systems did not utilize servo or proportional valves or position sensing for the motion control. Valves are just opened up, the hydraulic fluid flows and the cylinder stops when it hits the end stops, or the crash arresting system also known as operating in a bang-bang mode. 听During the all-important EFO (Emergency Fast Operate) situation there is considerable stress put on the barrier. Typically an accumulator is provided to supply additional hydraulic fluid for EFO and power failure. Consequently the constant stress from hitting the end stops was causing premature damage to barrier components and foundation. A new solution that addresses these issues could greatly improve reliability and lower maintenance costs for OEMs.

听

Hydraulic Velocity Profiling

听

刘玥首次大战黑人needed to meet the most stringent requirements for the wedge security barrier that entail an actuation system that could lift a heavy plate barrier designed to stop a 7.5 tonne (15,000 lb) vehicle going 80 kph (50 mph) with an allowable penetration of the truck bed of less than 1 m (3 ft), all in 1 second . 听Customers also wanted to obtain higher reliability in demanding environments, lower maintenance costs and improve performance.

听

The 刘玥首次大战黑人Solution

As an expert in both hydraulic and electric technologies, 刘玥首次大战黑人engineers evaluated the requirements for this application and recommended applying high performance electric actuation technology that could meet the speed and force requirements but offer some other key benefits such as lower maintenance costs, less environmental concerns and high reliability. Through velocity profiling, the constant stress from hitting end stops could be prevented thereby increasing the life of the barrier, while also providing smoother operation, lower component count and the ability to handle hostile environments, all important factors for longevity of the system.

听

Electric Velocity Profiling

Actuation Solution

To meet the needs of the customer 刘玥首次大战黑人provided the following actuation system:

刘玥首次大战黑人Electric Servo Actuator with a unique mechanical holding brake in case power is lost
High performance AC Servo Drive
Application-specific software for optimizing commissioning and sizing
Spring-assist actuator to reduce power requirement (optional)
Barrier Control Panel with all required components for operation including noise suppression to reduce the risk of electromagnetic interference (EMI) (optional)
Battery backup (optional)
Actuator heating for severe weather locations听

The heart of the solution is Moog鈥檚 integrated Servo Actuator and Servo Drive System with programmable control for acceleration/deceleration, speed, position and force which achieves extremely smooth, quiet operation. Since the Servo Drive controls the current into the motor, the force output of the actuator can be programmable for the specific barrier and installation, enabling optimized performance.听The other major advantage is the ability to operate reliably in hostile environments such as extreme low temperatures which are accommodated by using the motor as a heater to keep the encoder compartment at a programmable temperature level. Conditions such as rain and flooding are taken care of with the actuator environmental rating of IP67. Having no oil eliminates other environmental concerns and provides smooth consistent operation regardless of temperature swings.听

刘玥首次大战黑人Servo Actuators utilize high performance servo motor and ball screw technology integrated into a small high power density package with many advantages over induction motors and existing barrier hydraulic technology:

Servo motor can be stalled at continuous torque indefinitely without damage
Peak torque to 3X the motor鈥檚 continuous torque is available for high speed EFO
Servo technology provides a smaller physical envelope with power densities similar to hydraulics
Absolute encoder feedback eliminates homing requirements
Automatic actuator heating for extreme environmental conditions

Comparison of Hydraulic and Electric Systems

Cutaway of 刘玥首次大战黑人Electric Actuator

听

A major benefit of the electric system is the lower听component count, eliminating the need for the hydraulic infrastructure and reducing maintenance costs. Other features not available with the hydraulic system are also provided such as barrier obstruction detection. Should the barrier be deployed under a vehicle a decision can be made to continue or stop. Also provided on the actuator is a holding brake which is properly sequenced via the servo drive. When the barrier is in the deployed position, the mechanical brake is applied to hold position even if power is lost. This way if the terrorist tries to defeat the barrier by removing the power source, the barrier will remain in the deployed position. 听

Application-specific Software

One of the challenges of this application is that barrier manufacturers are more familiar with hydraulic than electric operation and needed assistance with sizing an electric actuator for security barriers. 刘玥首次大战黑人Engineers developed proprietary specific sizing software for security barriers in order to assist customers with design and optimization for operation with electric servo technology. All pertinent data is entered into the appropriate fields and a comprehensive report is generated. Important information such as power requirements and actuator life are reported allowing the barrier manufacturer to optimize the design by changing mounting locations, weight or even adding external spring assist.

Commissioning and site set-up are another critical factor on location. 刘玥首次大战黑人commissioning software is designed to make this quick and easy. Specific fields are provided for normal up/down motion as well as EFO. All moves are programmable for position, speed and acceleration/deceleration. Actuator parameters are stored in the absolute encoder therefore accidental damage to the servo actuator is eliminated.Value-added Offerings for Security Barrier ApplicationsSince site power can be quite limited, Moog鈥檚 Engineering Team developed a spring assist actuator to reduce power requirements when raising a heavy plate barrier rapidly. The stored energy in the spring when the barrier is in the down position is released when the raise command is given, assisting the electric actuator and reducing power requirements. This design provides longer actuator life and reduced site power requirement for fast EFO on heavy wedge/plate barriers. Power reduction can be as much as 5X or more.

听

听Spring assisted actuator

听

刘玥首次大战黑人engineers have also developed control sub-panel assemblies complete with all required components for barrier operation including noise suppression to reduce the risk of EMI interference with other equipment. Battery backup operation is also available making the sub-panel completely self-contained. A malfunction will affect only the one barrier not a group of them leaving sites more secure.

The Result 听

Until the last few years, hydraulic operation was the only technology with the power required to raise these large wedge/plate barriers quickly. 听As a technology neutral company with expertise in both hydraulic and electric technologies, 刘玥首次大战黑人collaborated with barrier OEMs to evaluate all options and see what was best for this application. 听The result is a new solution able to deliver similar power densities as hydraulic technologies but able to provide many advantages that electric uniquely offers for this application.听OEMs of high security vehicle barriers using the 刘玥首次大战黑人electric servo actuation system are experiencing many advantages over existing hydraulic technology including:

Virtually maintenance free, the electric actuator system lowers maintenance costs compared with hydraulic systems
Velocity profiling prevents premature barrier component failure
Emergency deployment <1.0 second (programmable)
Wide operating temperature range with programmable actuator heating for extreme environments
Tamper proof mechanical brake cannot be defeated assuring barrier will stay deployed
Programmable barrier obstruction detection
Increased power density and reliability in a self-contained ball screw design
Ideal for new and retrofit applications

Author

Donald Bockhahn, EMA Product Application Manager is responsible for electric actuation activity in the US market. Don has worked in electrical engineering for 30+ years, with 11 of those years designing high performance servo drives. For the last 5 years at 刘玥首次大战黑人he works in a sales support role promoting and applying electric actuation technology.

刘玥首次大战黑人

Popular 刘玥首次大战黑人