2-Axis Motor Controllers

For 24V Military Vehicles

This series of 2-axis, digital motor controllers is听designed to provide torque, velocity and position听loop closure to drive brushless motors for use in听military vehicle applications. The controller accepts听24VDC vehicle input power and command signals听from any fire control system, in either digital or听analog format, and interfaces with a control handle.听There are three controller models available (MC100D,听MC500D, MC1000D) that provide a range of output听current from 80Apk/axis up to 800Apk/axis. A variety听of communication interfaces are available, see听common specifications on page 2. These controllers听offer end user loop tuning to provide maximum听torque and velocity loop closure and they interface听with both resolvers and encoders for motor听commutation. The advanced space vector algorithms optimize performance for new or existing听motors to provide superior power densities. Typical applications are for use with gun turrets but听all of these controllers can be customized as required. There are a wide range of end user听programmable software features, as listed below.

听

CONTACT OUR EXPERTS >

Jump To:

Features

Literature

Extensive built in test
No-fire zones
Obstacle avoidance zones听
End-damping limits听

HUMS (Health Usage Monitoring System)
Acceleration limits
Comprehensive loop tuning听
Tracking/Stabilization Modes听
Field weakening听

Joystick shaping function听
Analog and digital I/O
Status and fault history听
Data logging

MC100D

The smallest controller in the family the MC100D can output 80Apk/axis in a compact, lightweight package. This controller has an听internal tilt/accelerometer sensor for improved stabilization performance.

MC500D

This MC500D is the mid-range model. It is available in 2 packages: the standard finned which can output 300Apk/axis or a cold plate听mount which can output 400Apk/axis. The finned model has 4 sets of holes predrilled for use with isolation mounts.

MC1000D

The MC1000D is the highest output model at 800Apk/axis. The sides of the controller are predrilled for use with mounting brackets.听Lifting handles (2) can be added if required. See picture of an MC1000D model with lifting handles and isolation mounts (back cover).

Common 2-Axis Brushless-Motor Controller Specs

Performance Characteristics

Features	Specifications
Power supply 鈥� control**	18VDC 鈥� 32VDC (per Mil-Std-1275)
Power supply 鈥� motors (MC500D and MC1000D only)	18VDC to 60VDC
Environmental specification	Complies with Mil-Std-810
EMC specifications	Complies with Mil-Std-461
Communication interfaces available (*)	CAN-Bus, RS-422, Ethernet, MILCAN or EtherCAT
Position sensor interface	SSI or EnDat serial interface
Motor commutation sensor	Resolver or encoder
Self protection听	Over-temperature and over-current
Option: stabilization kit	2-Axis gyro interface

(*) 鈥� not all communication interfaces are available with every model, consult 刘玥首次大战黑人Engineering

(**) 鈥� power supply noted is applicable for both controls and motors for the MC100D

Note: All of our products are flexible and customizable to meet your specific needs. Please contact us for more information

MC100D Digital 2-Axis 28V Brushless Motor Controller

Performance Characteristics

Features	Specifications
Temperature 鈥� baseplate	-40藲F to 160藲F (-40藲C to 71藲C)
Weight	15.4 lbs (7 kg)
Envelope	11.8鈥� x 8.3鈥� x 4.0鈥� (300 mm x 210 mm x 102 mm)
Output current (for each axis)	80 A peak

听

MC500D Digital 2-Axis 28V Brushless Motor Controller

Performance Characteristics

Features	Specifications
Temperature 鈥� ambient	-40藲F to 149藲F (-40藲C to 65藲C)
Weight	48.4 lbs (22 kg)
Envelope	16.5鈥� x 17.2鈥� x 5.4鈥� (418 mm x 437 mm x 138 mm)
Output current (Axis 1/Axis 2)	Finned: 300 A/200 A peak Cold plate: 400 A/400 A peak

听

MC1000D Digital 2-Axis 28V Brushless Motor Controller

Performance Characteristics

Features	Specifications
Temperature 鈥� ambient	-40藲F to 149藲F (-40藲C to 65藲C)
Weight	99 lbs (45 kg)
Envelope	17.8鈥� x 15.7鈥� x 7.8鈥� (451 mm x 400 mm x 197 mm)
Output current (for each axis)	800 A peak
Options	1) Lifting handles 2) Isolation mounts